Start Your Own Journey

accessories

Wheelmelt Hotmelt Carton sealer

Vacuum

Conveyors

Peel and Seal

System

Double sided

tape applicator

Wheelmelt Hotmelt Carton sealer

Wheelmelt table top gluer.

Wheelmelt

Table-Top hotmelt hand gluer for carton sealing and other glueing applications

Quick and simple to operate. Adjustable to accommodate a wide range of carton sizes, the Wheelmelt is one of the most versatile and multi purpose hand gluers available. It is often used for “get you out of trouble” applications, pilot launches, low speed production or resealing.

Special attachments can be fitted for individual jobs such as envelope sealing.

The Wheelmelt is easily transported and is used in industries throughout the world.

Standard Features

  • Adjustable glue flap pressure wheel

  • Seal carton flaps 15-300mm deep x upto 450mm wide

  • Speed up to 20 glue flaps per minute

  • Approx 2ltr tank capacity, use raw chips of hotmelt adhesive

  • Usable with pressure sensitive hotmelts

  • Different wheel widths available (glue application widths)

  • Temperature adjustable up to 165°C

  • Over temperature safety cut-out

  • Multiple wheels available

  • Carton back stop

  • 220-240V 1Ph 50Hz

  • 110v 50/60Hz version

    The WheelMelt tank heats the hot melt glue within and gives the application wheel a constant supply of adhesive to produce an accurate coating of glue to your products glue flap.

    Different wheel application widths available along with multiple wheels.The WheelMelt measures 365mm wide by 390mm long by 150mm high. Weight is 25kg

    Doctor blade glue quantity control allows you to apply a heavier or lighter application of glue to suit all products.

    Full Width Vacuum Transport Conveyor

    Vacuum Conveyor

    The BES® full width transport conveyor had been initially developed in response to our customers demands from the graphics and packaging industries.

    The specification was to transport a flat substrate without overhead restrictions, allowing the use of UV systems dryers, inkjet systems and friction feeders for cover-mounting.

    The BES® full width transport conveyor is a very versatile unit, which can be integrated in to an existing production line or supplied as an offline solutions. Especially when used with our other products  (friction feeders, shingle conveyors,tape applications and gluing systems). Our design and engineering team are available to carry out a site survey to evaluate your process.

    Standard Features

    • Integration to existing production

    • Complete offline solution available on request

    • Integration with existing PLC/ pattern controller for application systems

    • Suitable for use with flat substrate products

    • Quick and easy format setup

    • Optional infeed and out feed solu-tions available on request

    • Designed & manufactured in the UK

    • In house demonstrations and trials sample available on request

    • Full support from our UK service Team 

    Belt size

    standard 500mm/800mm/1200mm Wide x 1250-8000mm long roller centres.

    Height

    1100mm Max, 970mm Min Level, can be inclined end to end.

    Mobility

    Swivel locking wheels and adjustable levelling feet.

    Belt Speed

    20 metres per minute minimum speed
    60 metres per minute maximum speed

    Electronically variable between maximum and minimum speeds

    Control

    Separate On / Off Push buttons for both Main Motor and Vacuum Fans.

    Safety

    Two Emergency Stop Push buttons and Interlocked Fan Casings requiring manual reset after operation.

    Transport conveyor can be supplied in various belt width’s and length’s de-pending on the customers specification. The linear speeds of up to 60mtrs/min. As standard we are able to offer inline or offline solutions to meet your current and future  projects. Contact us today to arrange a site visit by our engineering team.

      Double Sided Tape Applicator

      Double Sided Tape Applicator

      The BES® Double sided tape applicator and optional bobbin dispenser has been developed in response to our customers demands, especially from the print finishing and associated markets.

      The system is designed to automatically apply a double sided tape product on to a substrate, allowing for easy finger lift removal of the silicone release tape backer, giving a self seal pack.

      The BES® Double sided tape applicator and optional bobbin dispenser can be supplied as a complete offline solution, or can be retrofitted to an existing transport carrier, utilizing any pattern controller and adhesive application system,to provide a complete inline solution.
      Our design and engineering team are available to carry out a site survey to evaluate your process.

      Standard Features

      • Inline solution using existing transport carrier

      • Complete offline solution on request

      • Integration with existing PLC/pattern controller and adhesive application system

      • Suitable for use with both finger lift & edge to edge glued tapes

      • Quick and easy format setup

      • Flexible adjustment of tape width

      • With optional modification for rippa type tapes

      • Designed & manufactured in the UK

      • In house demonstrations and trials

      • Sample available on request

      • Full support from our UK service

      Application Speed

      Up to 55mtrs per minute

      Tape Sizes

      Changeover guides are standard for 12, 18. and 24 mm wide tapes (optional :- 4mm or 6mm wide Rippa tape guide rollers available on request)

      Tape type

      Finger lift or edge to edge tape may be used.

      Tape Capacity

      - 300mm diameter roll, normally 500meters.

      Optional bobbin 370mm diameter roll , 152mm (6  ̎) core with a maximum width 185mm

      Substrate

      - Applies tape on to 80 gram paper and above ,subject to vacuum transport

      Minimum applied tape length: 50mm, shorter lengths by experimentation

      Mount Bracket

      Multi-adjustable for tracking, squareness, tilt and vertical positioning

      Electrical Supply

       120-230vAC 50/60 Hz 2amp

      Air Supply

      4 bar minimum, less than 10 nl/

        Peel & Seal

        Silicone ReleaseTape Liner Applicator and pre Loop Dispenser

        Peel & Seal

        E-Commerce packaging with silicone release liners are particularly popular in today’s world. With the BES Peel & Seal applicator, you will be able to apply the silicone release liners to your products.

        The Peel and Seal Applicator applies a narrow strip of PS hot melt adhesive using a coating nozzle, to a cardboard flap, usually the packaging lid. Next, a silicone release paper is precisely applied onto the glue via the tape applicator. The silicon paper strip is usually slightly longer than the underlying adhesive application for easier removal.

        Unlike an adhesive tape, the amount of adhesive can be adjusted flexibly and simply, depending on the surface and use (corrugated or solid cardboard). This can reduce adhesive consumption and lower costs. Furthermore, the flexible adjustment ensures the correct adhesion for later, secure closure. Settings and format changes are easy and quick via an integrated touch control panel.

        Standard Features

        • Apply silicon Peel & Seal easy close to your eCommerce products

        • Retrofit onto your existing transport carrier for in line application

        • Increased productivity and machine availability

        • Quality silicon release liners through precise adhesive applications, even at heigh speeds

        • Millimeter precise transport and positioning of silicon strip material

        • Low cost alternative to double sided adhesive tapes

        • Full support from our UK service Team

        Application Speed

        Up to 50mtrs per minute

        Tape Sizes

        Tape guides available from 18– 26mm silicone release liner, optional sizes on request

        Tape type

        Silicone release without adhesive

        Tape Capacity

        450mm diameter roll max, 76mm (3”) core

        Substrate

        Applies tape on to 300gram card and above, subject to transport guiding

        Minimum applied tape length

        50mm, shorter lengths by experimentation

        Mount Bracket

        Multi-adjustable for tracking, squareness, tilt and vertical positioning

        Electrical Supply

        120-230vAC 50/60 Hz 2amp

        Air Supply

        4 bar minimum, less than 10 nl/min

        Control

        Via an adhesive pattern controller or host machine PLC, 3-24vdc signal

        The BES Peel & Seal Tape real size is up to 450mm diameter, typically 18-25mm wide, with a 3" core. The system can be run at linear speeds of up to 50mtrs/min. Intended for board envelope sealing, typically using corrugated board. The Peel and Seal system requires mounting to a transport device. We can provide such a device, or it is likely that the equipment can be retrofitted to your carton-folder-gluer. Our engineers are available to visit and assess your own transport device.

          Contact us

          Sales & Retail
          worldwide

          Send a message to the sales team here, we'd love to hear from you.

          Latin America

          Mexico

          United Kingdom

          United States

          Europe

          Contact us

          Follow Us

          General Stuff

          Address

          Coaley Drive
          Milton Keynes
          MK17 7DD
          United Kingdom

          Newsletter